Enabling or Disabling SNMP
By default, management of the device through SNMP is
| ➢ | To enable or disable SNMP: |
| 1. | Open the SNMP Community Settings page (Setup menu > Administration tab > SNMP folder > SNMP Community Settings). |
| 2. | From the 'Disable SNMP' drop-down list (DisableSNMP parameter), select one of the following: |
| ● | Yes to disable SNMP. |
| ● | No to enable SNMP. |
| 3. | Click Apply. |
If you want the device to be managed by the One Voice Operations Center (OVOC) tool, you must enable SNMP.